View events by type

Siemens Sitrain TIA Portal Service 1 Course (TIA-SERV1) - 5 Days - 3 PLACES REMAINING

  • Date(s)
    Monday, 3 February - Friday, 7 February
  • Time(s)
    9:00 AM - 5:00 PM
  • Venue
    Engineers Ireland, 22 Clyde Road, Ballsbridge, Dublin 4, Ireland
  • Fee

    Member: €2650.00
    Non-Member: €2850.00

    NOTE: You can only book online using credit or debit card details.  If your preferred method of payment is by invoice / purchase order / bank transfer / other, please contact the CPD Training Team on 01-6651305, or email to secure a place.

  • CPD Credit
    35 hours   C2


Short Description

The Totally Integrated Automation Portal (TIA Portal) forms the work environment for integrated engineering with SIMATIC STEP 7 and SIMATIC WinCC. In this first part of the SIMATIC TIA Portal service training, we teach you the handling of the TIA Portal, basic knowledge about the structure of the SIMATIC S7 automation system, configuration and parameterization of hardware, and the basics of programming. You also receive an overview of HMI, PROFINET IO / PROFIBUS, and connecting drives. You will learn to diagnose and clear simple hardware faults and software errors. You will thus be capable of reducing downtimes in your plant. You can deepen your theoretical knowledge with numerous practical exercises on a TIA system model. This consists of a SIMATIC S7 automation system, ET200SP distributed I/O, Touchpanel, drive, and a belt driven model conveyor.



On completion of this course the participant will be able to do the following:

  • Understand the fundamentals of interaction of the TIA components
  • Reliably operate the "TIA Portal" engineering platform
  • Understand, change, and expand small STEP 7 programs
  • Configure, parameterize, and exchange SIMATIC S7 modules
  • Diagnose and fix simple hardware faults using the wiring test
  • Diagnose and fix simple program errors using the status block
  • Perform simple commissioning of TIA components


  • Overview and significant performance characteristics of the SIMATIC S7 system family
  • The components of the TIA Portal: STEP 7, WinCC, communication
  • Program execution in automation systems
  • Binary and digital operations
  • Setup and assembly of the automation system
  • Addressing and wiring the signal modules
  • Hardware and software commissioning of the SIMATIC S7 automation system with the TIA Portal
  • SIMATIC S7 hardware configuration and parameterisation
  • Presentation of a Touchpanel
  • Presentation of the drive
  • Setup and parameterisation of PROFINET IO system (ET-200SP), a Touch Panel (TP700) and a Sinamics G120 drive over PROFINET
  • Saving and documentation of the implemented program changes with the TIA Portal
  • Deeper understanding of contents through practical exercises on TIA system model


  • Basic knowledge of automation technology.
  • You can use the online tests below to find out whether you have sufficient prior knowledge to participate effectively in the course you wish to attend. If you answer more than 70 % of the questions correctly you are well prepared to take part in the course.

    Test TIA-SERV1


  • This training course is not appropriate for trainees using S7-200, S7-300 or S7-400 based systems. This course is also suitable for those using S7-1200 based systems. For more information concerning details of S7-300, and S7-400 please see the section called Simatic S7 PLC.


Make a Booking

3 February 2020



Cancellation requests must be made in writing. The following charges will apply:

0-15 working days 100%, 16-25 working days 50%. 

No fees will be charged where more than 25 working days written notice is received.

Notice period commences from the time Siemens plc, Industry Training Administration receives written confirmation. Substitutions will be accepted at any time for confirmed course places at no additional charge.

Siemens plc reserves the right to cancel a course, subject to written notice to confirmed participants not later than 10 working days prior to the course start date. In such event a full refund of fees already paid will be made. Siemens plc further reserves the right to cancel a course at any time where circumstances beyond its reasonable control make this necessary. When a course cannot be held or completed due to reasons beyond Siemens reasonable control, Siemens plc will endeavour to reschedule or complete the course within a reasonable period. In the event of this not being possible a full refund of fees already paid will be made. Siemens plc shall not be liable for any loss of any nature suffered or incurred by the customer or its trainees as a result of course cancellation.