Menu

RTP course pages

Engineers Ireland endorses training providers with the title of Registered Training Provider on the basis that they meet the best-practice criteria laid down in our quality assurance procedures.

Academic

Advanced Spatial Analysis Using GIS
Air Pollution: Monitoring, Assessment and Control
AutoCAD Essentials 
Category 6A is the clear choice for any new installation
Certificate in Built Environment Regulation
Certificate in Circular Economy Leadership for the Built Environment
Certificate In Emerging Digital Technologies – NCI
Certificate in Energy Conservation and Environmental Services
Certificate in Engineering in Building Information Modelling
Certificate in Fire Safety
Certificate in Science in Building Information Modelling and Digital Leadership
Cyber-Physical Systems and Control Micro-credential
Fusion 360 Essentials 
Higher Diploma in Engineering in Building Information Modelling
Higher Diploma in Engineering in Civil Engineering
Inner-Ease – flow and optimal performance
Introduction to XR: Applications and Technologies Micro-credential
IoT and Applications in Commercial Smart Lighting
Leadership Development Programme (LDP) Online
Low Carbon Power Technology Micro-credential
Master of Science in Building Information Modelling and Digital Leadership
Master of Science in Built Environment Regulation
Master of Science in Circular Economy Leadership for the Built Environment
Motion Picture Engineering Micro-credential
Postgraduate Diploma in Built Environment Regulation
Postgraduate Diploma in Science in Building Information Modelling and Digital Leadership
Postgraduate Diploma in Science in Circular Economy Leadership for the Built Environment
Power Over Ethernet and the impact on the network infrastructure sizing, design and installation plan
Process Validation & Equipment Validation
Revit Architecture Essentials
Solar Energy Conversion and Applications
Spatial Audio Micro-credential
Sustainable Green Organisations
Systemic Risk Management
Transport Modelling and Planning Micro-credential

Agriculture & Food

Fundamentals of Industrial XR
Geometrical Dimensioning & Tolerancing to BS 8888 & ISO Standards – Level 1
Geometric Dimensioning & Tolerancing to ASME Y14.5 – Level 1
Information and Application of Data Capture and Analysis
PLS Overhead Hoist System
Process Validation & Equipment Validation

An Roth

Biomedical

Chemical & Process

The ATEX Directives 1999/92/EC & 94/9/EC
AutoCAD Plant 3D
Certified Machinery Safety Expert, CMSE®
Chemical Process Safety (Level 8)
ESEER & Aermec NRP Multifunctional Units
Fundamentals of Industrial XR
Geometrical Dimensioning & Tolerancing to BS 8888 & ISO Standards – Level 1
Geometric Dimensioning & Tolerancing to ASME Y14.5 – Level 1
Information and Application of Data Capture and Analysis
SIL - The Total Compliance Approach
SIL and the Process Safety Lifecycle
Special Purpose Award Biopharmaceutical Processing (Level 7)
Validation Science (Level 7) Special Purpose Award

Civil

Advanced Spatial Analysis Using GIS
AutoCAD Essentials 
Access Auditor Training incorporating Part M 2010 and the Disability Access Certificate Application Process
An Introduction to Sustainable Drainage Systems (SuDS), SuDS Management Trains and IE Adoption requirements 
Accident Investigation Training
Air Handling Unit Construction and Performance
Air Tightness & Vapour Control in Modern Homes
Air-to-Water Heat Pumps - An Introduction
An introduction to the development of a cold rolled purlin secondary steel system with consideration of the role of physical testing
Building Defects Analysis (BD01)
Building Regulations Explained (BR01)
Basement Waterproofing Standards & Solutions
Category 6A is the clear choice for any new installation
Central Battery Systems
Certificate of Competence in Environmental Noise Measurement
Certificate of Competence in Workplace Noise Risk Assessment (CCWNRA)
Certificate in Construction Dispute Mediation
Chiller Range and Applications
Comfort in the Indoor Environment
Concrete on a Roll
Concrete Repair and Surface Protection to I.S. EN1504 (Modules 1-2)
Concrete Repair and Surface Protection to Waste Water and Drinking Water Networks and Reservoirs
Control of Smoke and Fire in Ventilation Systems
Corrosion Protection of Steel by Hot Dip Galvanizing
CPD ATEX Fans
Design and Control for Natural Ventilation
Design Risk Assessment Training
Designer Training Program – Hydronic Systems
Diploma in Construction Law
Diploma in Law
Dynamic Simulation Modelling
Design Considerations for Drainage
EC Motors
ECOdesign Directive 2009/125
Efficient AHU selection - to reduce chiller/AHU sizing
Emergency Lighting Standards IS3217
Employment Investigations
European Standard EN1886 as it applies to Air Handling Units
Evaluating Flood Risk Assessments
Evaluating Measurement Uncertainty - Level 1 (CT002)
Expert Witness Training / Courtroom Skills
Expert Witness Training for Engineers
Fabric Ducting Design
Firestop - Life Safety and Passive Fire Protection
Fire Safety - Technical Guidance Document B Explained (FS01)
Foundation Course in Measurement and Calibration (CT001)
Fundamentals of Industrial XR
Galvanizing and Sustainable Construction
Height Safety Systems
Helping Build Ireland's Infrastructure
High Speed Door Systems - Implementation Considerations
How to Make Buildings Accessible
How to prepare or review a Disability Access Certificate Application (incorporating Part M 2010)
Industrial Resin Flooring for Ireland's Leading Industries (Modules 1-2)
Innovation through Robotics
Innovative Central Vacuum Solutions
Innovative Free Cooling for Data Centres
Installation System - Modular M&E Support System
Intelligent Solutions for Natural Ventilation
Institute of Acoustics Certificate of Competence in Environmental Noise Measurement (CCENM)
Introduction to Ergonomics for Engineers & Designers
Introduction to Part M 2010 and Technical Guidance Document M 2010
Intruder Alarm System Design
JEMICLAD Rigid PVC Hygienic Wall Cladding System
KOMASTYLE Rigid PVC Wall Cladding System
Lean in Construction Yellow Belt
Liability, Indemnity & Structural Defects Insurances (IN01)
Master of Science in Management in the Built Environment
Measurement of Hazardous Substances (including Risk Assessment) - British Occupational Hygiene Society
Mitigating Measures
Natural Ventilation
New Construction Contracts Act - Introduction to Adjudication in Ireland
Part L (Conservation of Fuel & Energy) Building Regulations Update (PL01)
Passive Fire Protection Solutions
Passive House Design
Physical Access Control Systems Fundamentals
Post Installed Anchor Design
Post-Tensioning: Savings & Advantages in Design and Construction
Power Over Ethernet and the impact on the network infrastructure sizing, design and installation plan
Practical Temperature Measurement and Calibration (CT004)
Prestressed and Reinforced Concrete Lintels
Procurement: Best Practice for Contractors
Procurement: Best Practice for Public Bodies
Professional Diploma in Infrastructure Projects and Community Acceptance
Project Supervisor Design Process (PSDP)
Public Works Contracts
Retro-fitting of underfloor heating without raising floor heights
Roadstone: I.S. EN 206 Explained
Roadstone's General Aggregates and Fill Advice
Roadstone's General Asphalt Specification and Production Information
Roadstone's General Concrete Advice (Application and Use)
Roadstone's Solution to Permeable Paving
Roadstone's Solution to TGD Part L
Risk, Time and Money in the Public Works Contract
Revit Architecture Essentials
Safety in Excavations
Secure Entrance Control - Security, Aesthetics, Part M & Bespoke Design
Specialist Drainage Systems
Specifying Irish Blue Limestone: A Technical Guide
Standard Conditions of Engagement for Consultancy Contracts
Static Inverters
Structural Connector Solutions
Succeeding at Oral Hearings
Sustainable Building Choices
Sustainable Drainage Systems (SUDS)
Sustainable Facades for the Future
Sustainable Urban Drainage Design
Technical Report Writing
Technical Standards Update (TU01)
Temperature / Humidity Mapping of Enclosures (CT009)
TGD PART F 2019 –  Achieving Compliance with Mechanical Ventilation Systems
Understanding Fatigue in Bridges
Value Propositions using GGBS Concrete
Ventilating a Home: Choosing the Correct Ventilation System
VRV Heat Recovery
Water Cooled VRV

Computing

Electrical

1 Day Introduction to Thermography Training Course
Arc Fault Detection Device
Arc Flash PPE Safety Awareness Training Course
Application of Irish Legislation and Standards in the Procurement & Takeover of High Voltage Assets
BEMS, FMS (Façade Management System) and Systems Integration (BACnet)
Best Practice in Selecting LED Lighting Solutions
Building Automation – KNX Universal Protocol & DALI
Building Services Integration BACnet and other options
Beyond compliance – achieving greater safety with integrated fire and emergency lighting systems
Central Battery Systems
Cleanroom LED Lighting
Commercial Lighting Design - DIALUX - Skills Course to EN12464 Standards
Construction Product Regulations for Structured Cabling
Design Guidelines for Copper & Fibre Optics solutions
Electric Vehicle Charging - Infrastructure, Market and Connectivity
Electrical Components
Emergency Lighting Overview
Emergency Lighting Standards IS3217
Energy University (40+ Free Courses)
EV Charging: Why Management Matters
Forms of separation to EN61439
Fundamentals of Industrial XR
Fuseology - the design, function and application of electric fuse links
Generator Control Panels
Generator Fuel Systems
Generator Plant Rooms
Generator Sizing
Harmonics Seminar
How to Enable the UPS as an Energy Storage System for Dynamic Grid Support 
High Voltage Electrical Operations Course
High Voltage Switching & Operations
Human Centric Circadian Lighting – How it works and why it is beneficial
IE4 Synchronous Reluctance Drive and Motor Package
IEC61439 Standard for Circuit Breakers & Assemblies
IEC 61850 Technical Course
IIoT – Low Voltage Connectivity, Communications and Energy Efficiency
Information and Application of Data Capture and Analysis
Introduction to Emergency Lighting Standard IS3217:2013
Introduction to the KNX Building Automation Protocol EN 50090
Introduction to MV Switchgear (Presentation)
Introduction to Windfarm High Voltage Electrical Installations
IP CCTV - A Design Overview
IS 3217 Emergency Lighting Regulations/Systems
IT Cooling Fundamentals Overview
Leading the rEVolution - An introduction to Commercial Electric Car Charging and Payment processing
LED Applications and Technologies
LED Technologies—Understanding and Evaluating the Right Technology for Outdoor and Indoor applications
LED Technologies, Controls and Applications
LEDucation
Lithium-ion Battery Application and Product Reliability in the Data Centre
Lockout Tagout Safety Awareness Training Course
Low Voltage Electrical Safety Awareness Course
Luxo New Office Lighting Concept
LV Selectivity / Discrimination
LV Authorised Person - In House Training
LV Senior Authorised Person - In House Training
LV Testing Course - In House Training
Management & Control of Electrical Installations and Application of IS EN 50110 1&2
Mechanical Components and Electrical Drives
Medium Voltage Switchgear
Modular Wiring Systems
Modular Wiring Systems & Electrical Regulations I.S.10101:2020
Network Lighting Controls and Where DALI fits in
Networked Lighting Control Systems
Operation of Electrical Installation, High Voltage Safety Procedures
Passive Optical Networks Explained
Periodic Inspection & Testing of Industrial Electrical Systems
Practical Control Systems
Principles and Methodology of Explosion Protection
Portable Appliance Testing (PAT) 1-Day Training Course
Process Functional Safety - Safety Instrumented Systems
Relion; Protection and control. Enhancing grid reliability
Relion® 611 series Technical Sales Course
Relion® 615 series Technical Course
Relion® 620 series Technical Course
Relion® 630 series Technical Sales Course
Revit MEP
Solar PV – overview and system design
Sound Masking
Static Inverters
Substation Safety Awareness Training
Technical Overview of LV Switchgear and Panel Selection
Understanding DALI-2 & The Smart Building of the Future
UPS as a Reserve / Understanding the concept
UPS Installation Safety Requirements

Electronic & Computing

Category 6A is the clear choice for any new installation
Cyber-Physical Systems and Control Micro-credential
Data Visualisation
Information and Application of Data Capture and Analysis
Introduction to XR: Applications and Technologies Micro-credential
IoT and Applications in Commercial Smart Lighting
Microsoft Access Database
Microsoft PowerPoint Presentations
Microsoft Excel Expert - Advanced Spreadsheets
Motion Picture Engineering Micro-credential
PGDip/MSc in Industrial Networks and Cybersecurity
Power Over Ethernet and the impact on the network infrastructure sizing, design and installation plan
SOLIDWORKS Certification Day
SOLIDWORKS Essentials
SOLIDWORKS Training Passport
Spatial Audio Micro-credential

Energy, Environment & Climate Action

A guide to sewage treatment systems. Design, efficiency & best practice
Achieving Low Carbon Development through the Planning Process
An Introduction to Air to Water Heat Pumps – Monobloc 
An Introduction to Air to Water Heat Pumps – Split Combi Unit
An introduction to Condensing Oil boilers, Woodpellet boilers and Air to Water Heatpump
Air Source Heat Pumps & Hot Water Generation
Calculation Competency: Conventions and Standards for Thermal Bridging Calculations and Compliance
Certified Energy Manager
Condensing Oil, Woodpellet and Heatpump Product Training
Construction Product Regulations for Structured Cabling
Contract Supervision for Staff in Water Services Projects
Creating Effective Drainage and Insulation on Flat Roofs
Development of Guidance and Training on the Implementation of Solid Fuel Regulations
Development of Guidance and Training on the Management and Operation of Waste Water Overflows
Development of Guidance and Training on Water Supply Hygiene
Energy Management Systems according to ISO50001
Energy Mapping for Spatial Energy Demand Analysis
Energy Monitoring Systems
Energy Performance of Buildings Directive EN 15193
Energy University (40+ Free Courses)
Environmental Considerations for Renewable Energy Strategies
EV Charging: Why Management Matters
Fundamentals of Heat Pump Design (Geothermal, Air/Water and Exhaust Air)
Fundamentals of Industrial XR
Geometrical Dimensioning & Tolerancing to BS 8888 & ISO Standards – Level 1
Geometric Dimensioning & Tolerancing to ASME Y14.5 – Level 1
Guidance and Training on the Inspection of Domestic Waste Water Treatment and Disposal Systems
Guidance, Procedures and Training on Enforcement of the Waste Management Packaging Regs 2007
Heatpump Technology & Appropriate Heat Emitter Sizing
How to Enable the UPS as an Energy Storage System for Dynamic Grid Support 
IIoT – Low Voltage Connectivity, Communications and Energy Efficiency
Intelligent Natural Ventilation for smart and sustainable building design
Introduction to Specification & Design of NZEB Buildings
Introduction to Uninterruptible Power Supply (UPS) Systems & Batteries
IoT and Applications in Commercial Smart Lighting
Irish Wind Power – Our Competitive Advantage
Introduction to Programmable Logic Controllers
Leading the rEVolution - An introduction to Commercial Electric Car Charging and Payment processing
Lithium-ion Battery Application and Product Reliability in the Data Centre
Masterclass in Contaminated Land
Medium Voltage Switchgear
Mitigating Measures
Network Management - Leakage Control (Network Manager)
NZEB Compliant Heating & Ventilation Strategies for Apartments and Low Energy Housing
Overview of Jacopa's Wastewater Treatment Equipment Selection as required by Irish Water
Part L & RIAI 2030 Climate Challenge - An overview of operational energy targets and calculating embodied carbon
Part L 2011, Fabric Performance and towards Nearly Zero Energy Buildings (NZEB) and Zero Carbon House standards
Planning and Implementing Community Engagement for Local Authority Renewable Energy Strategies (LARES)
Polyethylene (PE) Electrofusion & Butt Fusion Welding (Gas)
Polyethylene (PE) Electrofusion & Butt Fusion Welding (Water)
Rainwater Harvesting
Renewable Energy in the Urban Environment
Renewable Energy Policy, Resources and Conversion Technologies
Renewable Energy Technology and Control Systems
Renewable Technologies (Wind & Solar PV)
Rotational Biological Contactors Design and Manufacturing
Saniflo Macerators - Pumping Waste Water Where Gravity Is An Issue
Seminar 2. Rotational Biological Contactors Design and Manufacturing
Small Scale Wastewater Treatment Design Challenges
Smart LV Panels
Solar Energy Conversion and Applications
Solar PV – overview and system design
Specification & Design of Heating Systems with Heat Pumps
Specification of Fixed Gas Detection
Stormwater Management Systems
Sustainable Green Organisations
Thermal Energy Storage Solutions Using Phase Change Materials
Transport Modelling and Planning Micro-credential
U-Value calculations as per standard EN 6946 and in accordance with BR 443 conventions
Understanding the Natura 2000 network and Appropriate Assessment
Underfloor Heating Systems Design & Control
Ventilation Solutions for Energy-efficient Buildings
Water & Heat Metering - How to Comply with Current Regulations
Wireless Temperature Sensing Systems

Executive & Business

Certificate In Emerging Digital Technologies – NCI
Certificate in Leadership for Performance & Change
Certificate in Leadership, Mindsets & Performance
Executive Research, Development & Innovation Management Program
Inner-Ease – flow and optimal performance
Leadership Development Programme (LDP) Online
Lean for Leaders
Lean Six Sigma Green Belt
Microsoft Access Database
Microsoft Excel Expert - Advanced Spreadsheets
Microsoft PowerPoint Presentations
Performance Management Fundamentals
Professional Growth through Performance Management
Systemic Risk Management
Women in Construction Leadership
 
 
 

Fire & Safety

Beyond compliance – achieving greater safety with integrated fire and emergency lighting systems
Certificate in Fire Safety
Communications for the Disabled
Designing for Safety in Construction Based on the DSC Practical Guide for Permanent Works Designers
Fire Alarm Module 1: Fire Detection and Alarm Systems and Standards
Fire Detection and Alarm Systems 3-day, 3rd-party Certified course incorporating I.S.3218:2013 - The Irish Standard for FDAS
Fire Detection and Alarm Systems Revised Standard Update
Fire Resistance in Steel Structures
Fire Resistance in Timber Structures
Fire Safety in Apartment Buildings
Firestop - Life Safety and Passive Fire Protection
Introduction to Emergency Lighting Standard IS3217:2013
I.S.3217:2013 Emergency Lighting One Day Review Course
Introduction to Programmable Logic Controllers
Lithium-ion Battery Application and Product Reliability in the Data Centre
Mechanical Smoke Extract Shaft Systems
Passive Fire Protection Solutions
Understanding Voice Alarm Systems

Geotechnical

Heritage

Inclusion & Diversity

Leadership Development Programme (LDP) Online
PLS Overhead Hoist System
Process Validation & Equipment Validation
Women in Construction Leadership

Law/Contracts

Local Government

Mechanical & Manufacturing

(Electro) Pneumatic and Hydraulic Control Circuits  
An Introduction to Siphonic Drainage for Engineers  
Addressing Data Centre Operational Challenges through Thermal Management Technologies  
Adiabatic and Evaporative Cooling – Basics of Psychometric and Solutions for Data Centre Applications  
Analytical Problem Solving Methodologies and Tools (Course 1)  
Asset Management Certificate Training  
AutoCAD Plant 3D  
AutoDesk Essentials  
Basic Principles of Asset Management, PAS 55 & ISO 55000 Maximising Returns from Capital Investments  
Basic Steam System Design Consideration  
Battery Technology and Design Considerations  
BEMS, FMS (Façade Management System) and Systems Integration (BACnet)  
Certified Machinery Safety Expert, CMSE®  
Chilled Water – Systems and Data Centre Optimisation, Intelligent Platforms for Optimum System Control and Tiers of Availability in Hydraulic Systems  
Circularity Thinking  
CNC Milling Course #2 – Hands on Milling - Operator to Setter  
CNC Milling Course #3 Controller - Advanced 4 Axis Milling Course covering the X, Y, Z and additional 4th Axis  
CNC Turning Course #1 - Controller - Basic 2 Axis (X & Z) Turning  
CNC Turning Course #2 – Hands on turning BASIC LEVEL Operator to Setter  
CNC Turning Course #3 - Controller – Advanced 4 Axis Turning course covering C & Y on Fanuc control with ISO codes and NC Guide  
Commercial Grease Separation  
Condensate Management  
Certificate in Innovative Materials for Industry 4.0  
Certificate in Leadership for Performance & Change  
Certificate in Leadership, Mindsets & Performance  
Certification, Qualification and Standardisation in Additive Manufacturing  
Data Visualisation  
Designer Training Program – Hydronic Systems  
Direct Expansion – Solutions and Free Cooling Options   
Earthing and Neutral Considerations  
Effective Use of Steam  
Electricity & Electrical Systems Level One, Two and Three  
Electronic and Robotic Technology  
Energy & Steam  
Engineering Technology  
EU Competitive Funding for Manufacturing Industry  
Evaluating Measurement Uncertainty - Level 1 (CT002)  
Fabric Ducting Design  
Fanuc Custom Macro B  
Festo CE and Machine Safety Programme  
Festo PLC811 Programmable Logic Controllers  
Foundation Course in Measurement and Calibration (CT001)  
Fundamentals of Industrial XR  
The Fundamentals & Principles of Building Energy Management Systems   
Fusion 360 Essentials  
Geometrical Dimensioning & Tolerancing to BS 8888 & ISO Standards – Level 1  
Geometric Dimensioning & Tolerancing to ASME Y14.5 – Level 1  
High Speed Door Systems - Implementation Considerations  
PGDip/MSc in Industrial Networks and Cybersecurity  
Information and Application of Data Capture and Analysis  
Introduction to 3D Printing  
Introduction to Addictive Manufacture and FDM Printing  
3D Certified User Training  
Innovation through Robotics  
Instrumentation and Calibration  
Intelligent Natural Ventilation for smart and sustainable building design  
Introduction to Programmable Logic Controllers (PLCs) and an Overview of SCADA Systems  
Introduction to Research, Development and Innovation (RD&I)  
Innovative Dust and Fume Extraction Solutions for Industry
 
Introduction to Textile Ductwork  
Knowledge Management best practice for Industry and SMEs  
Lean Manufacturing Tools  
Lean Six Sigma Green Belt  
Lean Six Sigma Green Belt  
Lean Six Sigma Yellow Belt  
Lean White Belt  
Lithium-ion Battery Application and Product Reliability in the Data Centre  
Low Carbon Power Technology Micro-credential  
Masterclass in Contaminated Land  
Master Class in Maintenance Management  
Milling 4 & 5 Axis VMC with Fanuc Control  
Modular Wiring Systems & Electrical Regulations I.S.10101:2020  
NZEB Compliant Heating & Ventilation Strategies for Apartments and Low Energy Housing  
Part L & RIAI 2030 Climate Challenge - An overview of operational energy targets and calculating embodied carbon  
PN281 Practical Electropneumatics  
Practical Temperature Measurement and Calibration (CT004)  
Process Functional Safety - Safety Instrumented Systems  
Pump Maintenance & Overhaul  
Pumps & Sustainable Pumping Systems  
Revit Architecture Essentials  
Revit MEP  
Secure Entrance Control - Security, Aesthetics, Part M & Bespoke Design  
SIL - The Total Compliance Approach  
SIL and the Process Safety Lifecycle  
Six Sigma Executive / Champion  
Six Sigma Green Belt  
Small Scale Wastewater Treatment Design Challenges  
Steam and Heat Exchange  
Steam Fundamentals  
Steam Quality  
Steam Trapping  
SOLIDWORKS Certification Day  
SOLIDWORKS Essentials  
SOLIDWORKS Training Passport  
Temperature / Humidity Mapping of Enclosures (CT009)  
Testing and Inspection of Plant Machinery  
TGD PART F 2019 –  Achieving Compliance with Mechanical Ventilation Systems  
The ATEX Directives 1999/92/EC & 94/9/EC  
The Employment Success Programme  
The most up to date protective and anti corrosive coatings 2013  
Understanding DALI-2 & The Smart Building of the Future  
Understanding Grease Trap and Interceptor Systems  
UPS Fundamentals – the History, Basics, Efficiency, Installation Requirements and Batteries  

MEETA Asset Management

People Skills

Accident Investigation Training
Administrative Technologies for Report Writing
An Introduction to IIoT
An Introduction to Machine Learning & Data Science
Certificate in Construction Dispute Mediation
Certificate in Leadership for Performance & Change
Certificate in Leadership, Mindsets & Performance
Circularity Thinking
Design Risk Assessment Training
Diploma in Construction Law
Diploma in Critical Business Skills (Level 8)
Diploma in Law
Employment Investigations
Evaluating Measurement Uncertainty - Level 1 (CT002)
Expert Witness Training / Courtroom Skills
Expert Witness Training for Engineers
Foundation Course in Measurement and Calibration (CT001)
Higher Diploma in Business Studies
Higher Diploma in Business Studies (part-time) 
Influencing Virtual Teams
Inner-Ease – flow and optimal performance
Innovate Together
Introduction to Ergonomics for Engineers & Designers
Lean Manufacturing Tools
Lean Sigma Black Belt
Lean Sigma Green Belt
Lean Sigma Master Black Belt
Lean Sigma White Belt
Lean Sigma Yellow Belt
Lean Six Sigma Black Belt QQI (HET) Diploma in Process Engineering, Special Purpose Award 8S20275
Lean Six Sigma Green Belt
Lean Six Sigma Green Belt
Lean Six Sigma Yellow Belt
Master of Science in Management in the Built Environment
Microsoft Access Database
Microsoft Excel Expert - Advanced Spreadsheets
Microsoft PowerPoint Presentations
New Construction Contracts Act - Introduction to Adjudication in Ireland
Procurement Procedures
Performance Management Fundamentals
Practical Temperature Measurement and Calibration (CT004)
Procurement: Best Practice for Contractors
Procurement: Best Practice for Public Bodies
Professional Growth through Performance Management
Project Supervisor Design Process (PSDP)
Public Works Contracts
Risk, Time and Money in the Public Works Contract
Six Sigma Executive / Champion
Six Sigma Green Belt
Specialist Diploma in Lean & Quality Systems
Standard Conditions of Engagement for Consultancy Contracts
Succeeding at Oral Hearings
Technical Report Writing
The Employment Success Programme
The Engineer as an Expert Witness

Project Management

Roads & Transportation

Fundamentals of Industrial XR
Fundamentals of Surface Dressing
Geosynthetics in Engineering - An Overview
Professional Diploma in Infrastructure Projects and Community Acceptance
Road Recycling - Basic Concepts
Roadstone: I.S. EN 206 Explained
Roadstone's General Aggregates and Fill Advice
Roadstone's General Asphalt Specification and Production Information
Roadstone's General Concrete Advice (Application and Use)
Roadstone's Solution to Permeable Paving
Roadstone's Solution to TGD Part L
Temporary Traffic Management for Engineers
Transport Modelling and Planning Micro-credential

Structures & Construction

An Introduction to Siphonic Drainage for Engineers
AutoCAD Essentials
AutoCAD Plant 3D
Basement Waterproofing Standards & Solutions
Category 6A is the clear choice for any new installation
Certificate in Built Environment Regulation
Certificate in Circular Economy Leadership for the Built Environment
Certificate in Energy Conservation and Environmental Services
Certificate in Engineering in Building Information Modelling
Certificate in Science in Building Information Modelling and Digital Leadership
Fundamentals of Industrial XR
Fusion 360 Essentials
Higher Diploma in Engineering in Building Information Modelling
Higher Diploma in Engineering in Civil Engineering
Intelligent Natural Ventilation for smart and sustainable building design
IT Cooling Fundamentals Overview
Lean in Construction Green Belt
Lean in Construction Yellow Belt
Lean White Belt
Life cycle of a metal roof: A specifiers guide to good practice
Master of Science in Building Information Modelling and Digital Leadership
Master of Science in Built Environment Regulation
Master of Science in Circular Economy Leadership for the Built Environment
Methods and Applications to Improve Air and Windtightness, Thermal Bridging
PLS Overhead Hoist System
Postgraduate Diploma in Built Environment Regulation
Postgraduate Diploma in Science in Building Information Modelling and Digital Leadership
Postgraduate Diploma in Science in Circular Economy Leadership for the Built Environment
Power Over Ethernet and the impact on the network infrastructure sizing, design and installation plan
Process Validation & Equipment Validation
Revit Architecture Essentials
Ventilation Solutions for Energy-efficient Buildings
Why gutters fail and the options to repair, replace or refurbish: A specifiers guide

Water & Environmental

A guide to sewage treatment systems. Design, efficiency & best practice  
An Introduction to Sustainable Drainage Systems (SuDS), SuDS Management Trains and IE Adoption requirements   
Achieving Low Carbon Development through the Planning Process  
Air Pollution: Monitoring, Assessment and Control  
AutoCAD Plant 3D  
Building Capacity: Local Authority Climate Action Training Programme  
Championing Leadership: Local Authority Climate Action Training Programme  
Climate Action Raising Awareness Training for Local Authorities  
Contract Supervision for Staff in Water Services Projects  
Design Considerations for Drainage  
Development of Guidance and Training on the Implementation of Solid Fuel Regulations  
Development of Guidance and Training on the Management and Operation of Waste Water Overflows  
Development of Guidance and Training on Water Supply Hygiene  
Energy Mapping for Spatial Energy Demand Analysis  
Environmental Considerations for Renewable Energy Strategies  
Fundamentals of Industrial XR  
Guidance and Training on the Inspection of Domestic Waste Water Treatment and Disposal Systems  
Guidance, Procedures and Training on Enforcement of the Waste Management Packaging Regs 2007  
Life cycle of a metal roof: A specifiers guide to good practice  
Masterclass in Contaminated Land  
Mitigating Measures  
Overview of Jacopa's Wastewater Treatment Equipment Selection as required by Irish Water  
Planning and Implementing Community Engagement for Local Authority Renewable Energy Strategies (LARES)  
Professional Diploma in Infrastructure Projects and Community Acceptance  
Renewable Energy in the Urban Environment  
Renewable Energy Policy, Resources and Conversion Technologies  
Rotational Biological Contactors Design and Manufacturing  
Saniflo Macerators - Pumping Waste Water Where Gravity Is An Issue  
Seminar 2. Rotational Biological Contactors Design and Manufacturing  
Small Scale Wastewater Treatment Design Challenges  
Specification of Fixed Gas Detection  
Sustainable Urban Drainage Design  
Understanding the Natura 2000 network and Appropriate Assessment  
Why gutters fail and the options to repair, replace or refurbish: A specifiers guide  

Public Sector

Young Engineers

In company training
As a professional you might want to inform your employer about Engineers Ireland’s In-company training.
Find out more